The PVC wire box pipe fitting mold is processed by an injection molding machine. The raw material is polyvinyl chloride. It is an environmentally friendly and non-toxic renewable resource. However, in order to improve the performance of PVC, Yuanrun Mould usually adds some reinforcing agents and anti-aging in the manufacturing process. Additives and other auxiliary materials, so PVC products usually do not store food and medicine. According to the amount of plasticizer, PVC can be divided into soft PVC and hard PVC (UPVC). Pipe fittings have significant advantages in the construction industry, their thickness is only 2-3mm, and the weight per square meter is only 2-3kg.

PVC wire box pipe fitting mold is a tool for producing PVC wire box pipe fittings, so how to use PVC wire box pipe fitting molds? In the molding process of the mold, it is necessary to put PVC into the injection extruder, and inject it into the mold cavity; when the mold is closed, the material is injected into the mold cavity under high pressure, and then the mold temperature is cooled by circulating water, and when the part solidifies, open the mold and remove the fittings. Resin determines the type of plastic extruder, and can also produce various types of PVC wire box pipe fitting molds. In addition, it is necessary to strictly control the temperature according to the raw materials to prevent the decomposition of the raw materials.

It should be noted that it is recommended to use anti-corrosion steel molds to make wire box molds. In this way, the mold can withstand the corrosion of the PVC material during the molding process, and the service life of the mold can reach millions of times. The special circulating water cooling design allows our customers to produce the required PVC pipes/PVC fittings in a shorter time. In addition, this PVC pipe fitting can withstand high pressure in the environment of use.